The invention refers to primycin or a primycin component or a combination of primycin components, for use in the treatment or prevention of infections caused by Gram-positive bacteria resistant to methicillin and/or vancomycin and/or mupirocin or by penicillin-resistant streptococci. The invention also covers antibiotic compositions containing these active agents.

BACKGROUND OF THE INVENTION

Primycin is a macrolide antibiotic complex comprising more than 20 components, 90% of which consists of nine main components belonging to three major groups.

The first report on primycin was published in 1954 by VÃ¡lyi-Nagy et al. who isolated the substance from Streptomyces primycini cultures [VÃ¡lyi-Nagy T, Uri J, SzilÃ¡gyi I. (1954): Nature; 174, 1105.]. Authors report that purified primycin possesses high antibacterial activity against Gram-positive bacteria, namely Staphylococcus and Mycobacterium species with a minimal inhibitory concentration (MIC) of 0.02 to 0.06 mg/L. According to the paper, primycin is effective against â€œresistantâ€ strains but the authors do not denominate antimicrobial agents against which these strains are resistant.

In a subsequent study VÃ¡lyi-Nagy et al. report primycin susceptibility of streptomycin-resistant Mycobacterium strains [VÃ¡lyi-Nagy T, Kelentey B. (1960): Arch Int Pharmacodyn Ther 124: 466-481.].

A subsequent publication states that primycin is effective against Gram-negative species with MIC values hundred times higher than those obtained in case of Gram-positives [HorvÃ¡th I, Kramer M, Bauer P I et. al. (1979): Arch Microbiol. 121(2):135-139.]. Authors state this referring unfoundedly to the above Nature article (since the latter does not contain such information).

In the same year, a clear denial of previous statement appeared in a publication on the crystallization of primycin [Uri J V, Actor P. (1979): J Antibiot (Tokyo) November; 32(11):1207-1209.]. In this paper both crystalline primycin and its amorphous predecessor are reported to be ineffective against Gram-negative species. This article also confirms primycin susceptibility of isolates of S. aureus and Streptococcus faecalis (i.e. Enterococcus faecalis according to the current nomenclature). The MICs reported for these species were in the range of 0.25 to 0.5 Î¼g/ml except for S. aureus ATCC 25923 strain, which was not inhibited even at 2 Î¼g/ml, i.e. at the highest primycin concentration tested. The authors found no remarkable difference in the efficacy of amorphous and crystalline primycin.

In a subsequent study [Uri J V. (1986): Acta Microbiol Hung; 33(2):141-146] MIC values for crystalline primycin were measured in media possessing different pH values (i.e. 6, 7.3 and 8, respectively) on large collections of clinical isolates of S. aureus, S. epidermidis, E. faecalis (that time designated as S. faecalis) and laboratory strain Listeria monocytogenes. All investigated strains were inhibited with MIC values of 0.12 to 0.5 Î¼g/ml, which were only slightly influenced by the actual pH. For laboratory strain L. monocytogenes the MIC value of 0.25 Î¼g/ml was measured. The author also stated that the MIC values of primycin were independent of the status of resistance to other antibiotics, however, he did not denominate the latter.

In another publication on the chemical structure of primycin [Frank J, DÃ©kÃ¡ny Gy, Pelczer I, ApSimon W J (1987): Tetrahedron Letters; 28:2759-2762] authors describe primycin as a multicomponent mixture and present the chemical structures of nine main components. They classify primycin in the macrolide antibiotic group.

A review [NÃ³grÃ¡di M. (1988): Drugs of Today 24(8): 563-566] repeats earlier statements according to which primycin is highly effective against Gram-positive bacteria, including â€œresistant and polyresistantâ€ strains, and in high concentrations, also against Gram-negative bacteria. MIC ranges of primycin for specific genera were summarized as follows: 0.02 to 0.1 mg/L for Staphylococcus spp., Streptococcus spp., Bacillus spp., Mycobacterium spp., Listeria spp., Sarcina spp., Sporosarcina spp., Propionibacterium spp., 1 to 10 mg/L for Neisseria spp., Enterococcus spp. Vibrio spp., 10 to 25 mg/l for Shigella spp. and 25 to 50 mg/l for Pasteurella spp. and Serratia spp. MIC values of primycin for specific bacterial strains were compared with those of ampicillin, erythromycin, oxytetracycline, streptomycin and clindamycin, as shown in table 1.

TABLE 1Efficacy of primycin and reference antibiotics against different bacteria by NÃ³grÃ¡diMIC (mg/l)OrganismPrimycinAmpicillinErythromycinOxytetracyclineStreptomycinClindamycinStaphylococcus0.78<0.5<0.562.52.031.3epidermidis 7586Staphylococcus0.39<0.5>2501.02.0>250aureus 7503Diphteroides 826450.031.3>25031.3>250250Staphylococcus0.39<0.51.0<0.51.015.6saprophyticus8454Serotype Î²1.56<0.50.51.03.9125Streptococcus8252Streptococcus mitis50.07.82501.0250>2505728Staphylococcus0.39<0.525031.32.031.3hominis 7835Streptococcus0.39<0.57.82.02.031.3simulans 7866Micrococcus spp.0.78<0.5<0.57.83.915.6Staphylococcus0.78<0.5<0.531.33.931.3capitisStaphylococcus25.0<0.51.0<0.53.962.5aureus ATCC25923Escherichia coli B50.02.062.51.015.6>2501218Enterobacter50.07.82502.07.8>250cloacae B 520Bacillus subtilis0.39<0.5<0.5<0.51.015.6ATCC 6633Propionibacterium<0.11.0<0.5<0.5<0.50.5acnes

This review cited another study [NÃ³grÃ¡di M. (1988): Drugs of Today 24(8): 563-566] according to which 1% of a collection of 279 erythromycin-sensitive Staphylococcus spp. strains was primycin-resistant (MICâ‰§5 mg/L), while 13% of 71 erythromycin-resistant staphylococci presented primycin resistance.

In a handbook [Bryskier A. (2005) ASM Press Washington D.C.: Antimicrobialsâ€”antibacterials and antifungals, chapter titled â€œPrimycinâ€ , pages 1179-1180] primycin is characterized as being effective against S. aureus and coagulase-negative staphylococci but showing only moderate efficacy against enterococci and S. pyogenes. The author mentions that primycin is effective against Bacillus spp. and Micrococcus spp., but ineffective against Corynebacterium spp., Enterobacteriaceae species, Pseudomonas aeruginosa, yeasts and dermatophytes. The author presents a table which partly overlaps with the one included in the cited NÃ³grÃ¡di article, see table 2.

TABLE 2Efficacy of primycin and reference antibiotics against different bacteria by BryskierMIC (mg/l)Organism(s)Primycin Ampicillin Erythromycin ATetracyclineClindamycinS. aureus0.39<0.5>2501.0>250S. aureus ATCC25<0.51.0<0.562.525923Staphylococcus0.78<0.5<0.562.531.3epidermidisS. pyogenes1.56<0.50.51.0125Streptococcus507.82501.0>250mitisMicrococcus0.78<0.5<0.57.815.6Coryneform(s)5031.3>25031.3250B. subtilis ATCC0.39<0.5<0.5<0.515.66633Escherichia coli502.062.51.0>250Enterobacter507.82502.0>250cloacaePropionibacterium<0.11.0<0.5<0.50.5acnes

Hungarian Patent No. 153593 (Owner: Chinoin GyÃ³gyszer Ã©s VegyÃ©szeti TermÃ©kek GyÃ¡ra Rt., Budapest) describes an improved process for the preparation of primycin. This patent concerns an industrial-scale process utilizing a Thermopolyspora galeriensis strain, by which primycin can be produced more effectively. Antibiotic-producing properties of the new industrial strain surpass those of the Streptomyces primycini strains used previously for this purpose.

Hungarian Patents Nos. 195514, 196309 and 196822 (Owner for each: Chinoin GyÃ³gyszer Ã©s VegyÃ©szeti TermÃ©kek GyÃ¡ra R T, Budapest) disclose information on microbial pathogens against which primycin is applicable. In each document it is declared in general that primycin is effective primarily against Gram-positive pathogens.

Hungarian Patent No. 196309 describes synergistic effect of dual or triple combinations of primycin components A1, B1 and C1 in various mass ratios. The antimicrobial effect of the individual primycin components is also described, which proves their independent applicability.

U.S. Pat. No. 4,873,348 discloses nine components of primycin and describe the outstanding efficacy of oxypricin (primycin component C1).

Summary of Product Characteristics of Ebrimycin gel, a human medicinal product containing primycin as active substance, includes the following statement: Based on literary data, synergistic interaction is present in dual or multiple combinations of primycin with agents selected from the group of oxytetracycline, streptomycin and oxacillin, or from penicillin and vancomycin. Antagonistic interaction of primycin is reported with novobiocin, erythromycin, chloramphenicol, fuzidine.

Synergistic interactions of primycin with other antibiotics are described in the following documents as well.

According to U.S. Pat. No. 3,949,077 primycin shows synergistic effect in dual combination with viomycin, streptomycin, oxacillin, neomycin or oxytetracycline or in triple combination with neomycin and oxytetracycline.

U.S. Pat. No. 4,404,189 discloses synergistic combinations of primycin with sisomicin and/or doxycyclin.

The Problem to be Solved by the Invention

Antibiotic resistance is an emerging problem in the therapy of bacterial infections. Resistance against widely used antibiotics is already so frequent that new therapy protocols have to be elaborated for patients affected.

The scientific literare on the applicability of primycin is rather incomplete, still it suggests that primycin is efficient primarily against Gram-positive pathogens, particularly against Staphylococcus species.

According to the above cited Hungarian Patents Nos. 195514, 196309 and 196822 primycin is also active against polyresistant strains. However the credibility of this statement cannot be verified; the antibiotics to which these bacterial strains show resistancy were not specified, moreover some of the strains titled in these patents as being polyresistant are no longer available (i.e. no information is available concerning their â€œpolyresistanceâ€ ). Even a strain that was not polyresistant at the filing date of these patents was mentioned, as seen in table 3. It can be stated however, that these strains cannot be characterized by the antibiotic resistances discussed in the present description.

Furthermore, the presently studied Gram-positive bacterial strain Streptococcus pneumoniae was not mentioned in the above patents.

TABLE 3Gram-positive bacterial strains titled as polyresistant in the patent literature on theefficacy of primycinBacterial strains titled as polyresistant in earlier patentsSpeciesStrain id. numberNoteBacillus subtilisATCC 6633Not polyresistant. A strain oftenused to estimate the efficacy ofantibiotics.Bacillus subtilisCCM 1718, ATCC 9799Not resistant against methicillin,Bacillus cereusCCM 2010, ATCC 14579mupirocin or vancomycin.Bacillus licheniformisCCM 2182Polyresistance is not confirmed.Bacillus licheniformisCCM 2205, ATCC 9789Listeria monocytogenesCCM 5576, ATCC 19111Micrococcus luteusDSM 20030, ATCC 4698Sporosarcina ureaeDSM 317Staphylococcus aureusCCM 885, ATCC 12600Staphylococcus aureusCCM 2317Staphylococcus aureusCCM 2514Not available.Staphylococcus aureusCCM 2326Methicillin-, mupirocin- orStaphylococcus aureusCCM 2515vancomycin-resistance is notpresent. Polyresistance is notconfirmed.Staphylococcus epidermidisCCM 2271Not available.Staphylococcus aureusSmith ATCC 12715, 19636Methicillin-, mupirocin- orStaphylococcus aureusDSM 20231, ATCC 12600vancomycin-resistance is notStreptococcus faecalisCCM 1875, ATCC 11700present. Polyresistance is notStreptococcus agalactiaeCCM 5534confirmed.Streptococcus agalactiaeCCM 5153Streptococcus disgalactiaeCCM 5548, ATCC 9026Streptococcus disgalactiaeATCC 9926Micrococcus flavusATCC 10240

The purpose of our work was to reveal yet unknown application opportunities of primycin, primarily against well-characterized pathogen groups with specified antibiotic resistance causing significant difficulties in the therapy. The primycin susceptibility of these pathogen groups and thus, the applicability of primycin against them have not been described until now.

Presently, the following strains cause the most and major problems in the therapy: methicillin-resistant Staphylococcus aureus (MRSA) and coagulase-negative staphylococci (MRCoNS), vancomycin-resistant enterococci (VRE), vancomycin-intermediate and vancomycin-resistant Staphylococcus aureus (VISA and VRSA), the latter strains possess methicillin-resistance as well. To eradicate asymptomytic MRSA/VISA/VRSA-colonization of the hospital staff, Mupirocin is usually used, which resulted in selection of mupirocin-resistant variations of these pathogens. The afore-mentioned resistances are often accompanied by cross-resistances to several agents, including macrolide antibiotics and thus theoretically to primycin as well. This theory is supported by the fact that, while earlier publications did not mention primycin-resistance, the above cited paper by NÃ³grÃ¡di (1988) reported that 1% of a collection of 279 erythromycin-sensitive Staphylococcus spp. strains was primycin-resistant (MICâ‰§5 mg/L), while 13% of 71 erythromycin-resistant staphylococci presented primycin resistance, which indicates a connection between erythromycin- and primycin-resistance.

In addition, primycin resistance appeared in case of Staphylococcus aureus ATCC 25923 strain, according to earlier publications. In view of the fact that primycin has been on the market since the issuance of the papers that already mentioned primycin-resistant strains, there has been a chance for selection and spreading of primycin-resistant strains.

Besides those mentioned above, currently upcoming Streptococcus pneumoniae strains with decreased penicillin susceptibility or penicillin-resistance are also of great clinical importance.

In respect of the adequate therapy and the related clinical outcome, patients with infections caused by bacteria possessing the above-described resistance(s) constitute patient groups clearly separated from those infected by susceptible strains of the same species.

By testing the primycin-susceptibility of bacteria possessing the above-described resistance(s) it can be decided whether these strains show cross-resistance to primycin. If not, primycin can afford new opportunity in therapy and prevention of infections caused by these bacteria.

GENERAL DESCRIPTION OF THE INVENTION

The invention relates to primycin or a primycin component or a combination of primycin components for use in the treatment or prevention of infections caused by methicillin-resistant Staphylococcus aureus (MRSA), methicillin-resistant coagulase-negative Staphylococcus spp. (MRCoNS), vancomycin-intermediate or vancomycin-resistant Staphylococcus aureus (VISA, VRSA), mupirocin-resistant Staphylococcus spp., vancomycin-resistant Enterococcus spp. (VRE) or penicillin-resistant Streptococcus pneumoniae strains.

The invention covers pharmaceutical compositions containing primycin or a primycin component or a combination thereof for use in the treatment or prevention of infections caused by the bacterial strains defined above.

The invention also covers antibiotic compositions containing primycin or a primycin component or a combination thereof for use in the treatment or prevention of infections caused by the bacterial strains defined above.

DETAILED DESCRIPTION OF THE INVENTION

Primycin components for use according to the invention are represented by general formula (I):

[Image Omitted]

wherein R1 is n-butyl, n-pentyl or n-hexyl and R2 is arabinosyl, H or OH.

Said primycin components are in basic form or in salt form. Among them preferred are sulphate salts, but they can form salts with other inorganic or organic acids, such as acetate.

Denominations and substituents R1 and R2 of the primycin components of formula (I) are as follows:

ComponentR1R2A1 (chinopricin)n-butyl-arabinosylA2 (midopricin)n-pentyl-arabinosylA3 (metipricin)n-hexyl-arabinosylB1 (hydropricin) n-butylâ€”HB2 (hymipricin)n-pentylâ€”HB3 (hymetipricin)n-hexylâ€”HC1 (oxypricin)n-butylâ€”OHC2 (oxymipricin)n-pentylâ€”OHC3 (oxymetipricin)n-hexylâ€”OH

The chemical name of primycin component A1 is for example 18-arabinosyl-2-butyl-3,7,11,15,19,21,23,25,27,37-decahydroxy-4,16,32,34,36-pentamethyl-tetraconta-16,32-diene-35-O-lacton-40-guanidin-sulphate or {5-/19-(Î±-D-Arabinofuranosyloxy)-35-butyl-10,12,14,16,18,22,26,30,34-nonahydroxy-3,5,21,33-tetramethyl-36-oxooxacyclohexatriaconta-4,40-diene-2-il/-4-hydroxyhexyl}-guanidin-sulphate.

The term â€œcombination of primycin componentsâ€ used in the present description refers to a mixture of at least two primycin components in any ratio.

In one embodiment, the invention relates to combination of primycin components A1 and B1 in a ratio of 1:3 to 3:1, for example 1:3, 1:1 or 3:1 (molar ratios).

In another embodiment, the invention relates to combination of primycin components A1 and C1 in a ratio of 1:3 to 3:1, for example 1:3, 1:1 or 3:1.

In another embodiment, the invention relates to combination of primycin components C1 and B1 in a ratio of 1:3 to 3:1, for example 1:3, 1:1 or 3:1.

In another embodiment, the invention relates to combination of primycin components A1, B1 and C1 in a ratio of 4:3:3 to 7:2:1, for example 4:3:3, 5:2.5, 6:2:2 or 7:2:1.

Primycin for use according to the present invention can be manufactured via the process described in the above Hungarian Patent No. 153593 (Chinoin). The primycin components can be prepared by the processes described in Hungarian Patents Nos. 195514 (published as T/39186) and 196425 (published as T/39187). Full contents of these patents are incorporated in the present description by reference.

The pharmaceutical composition according to the invention contains as active agent primycin or a primycin compound or a composition of primycin compounds together with at least one pharmaceutical acceptable carrier or additive.

The term â€œpharmaceutical compositionâ€ used in the present description refers to any composition containing together with carriers and/or additives, an active agent useable for retaining or recovering health of a human or an animal, independently of the way of administration, including dietary supplements, functioned food nutraceutical food and the like.

The pharmaceutical compositions according to the invention can be in any commonly used forms, for example solid, semisolid or liquid forms and contain commonly used excipients and/or vehicle materials determined by the given form.

Solid pharmaceutical forms can be for example tablets, capsules or coated tablets, semisolid forms can be ointments, creams or gels, liquid forms can be solutions, suspensions or emulsions.

Solid forms, like tablets capsules or coated tablets can be administered orally. Further oral preparations are liquid compositions like solutions, suspensions or emulsions. Powder mixtures added to forage or solutions added to drinking water can be used for veterinary applications.

Parenterally applicable pharmaceutical forms are aqueous solutions, suspensions or emulsions.

Topically or locally applicable forms are powders, ointments, gels or aqueous solutions, suspensions or emulsions. Semisolid and liquid forms are preferably used on the surfaces of mucous membranes.

The pharmaceutical compositions are prepared by mixing the active substance with non-toxic, inert vehicles and/or excipients commonly used in pharmaceutics.

Conventionally used vehicle materials are for example water, gelatine, lactose, starch, magnesium-stearate, stearic acid, glycols, alcohols, vegetable oils, etc. In case of creams and ointments vaseline, liquid paraffin, lanoline, polyethylene-glycols, alcohols and any mixtures thereof can be used as vehicles. Excipients conventionally used in pharmaceutics are for example preservatives, buffers, moisturizers, emulsifiers, colorants, flavorings, etc.

The pharmaceutical compositions exemplified above and preparations thereof are well known e.g. from the Remington's Pharmaceutical Sciences manual [18. issue, Mack Publishing Co., Easton, USA (1990)].

The pharmaceutical compositions according to the invention are preferably applied on the surfaces of skin or mucous membrane. Advantageously, they are in the forms of creams, ointments, gels, solutions or aqueous suspensions, the latter are preferably in the forms of eye drops, nasal drops or nasal spray, lotion, and can contain commonly used vehicles and/or excipients adequate to the given form.

The pharmaceutical compositions according to the invention contain primycin or a primycin component or a combination of primycin components in an amount adequate to the specific form, the way of administration, and the MIC value of the target microorganism.

The topically applicable pharmaceutical compositions according to the invention contain primycin or a primycin component or a combination of primycin components preferably in a concentration range of 0.01 to 10 mg/g, more preferably of 0.1 to 1.0 mg/g.

An aqueous suspension applicable on mucous membranes contains preferably 50 to 150 mg/g of polyvinyl alcohol, 0.2 to 1.2 mg/g of anhydrous NaH₂PO₄, 4.0 to 5.0 mg/g of Na₂HPO₄.2H₂O, 6 to 7 mg/g of polysorbate, 1.0 to 1.5 mg/g of disodium edetate, 5.0 to 6.0 mg/g of sodium chloride and water for injection.

An alcoholic gel according to the invention preferably contains 7.0 to 14 mg/g of carbomera, 15 to 20 mg/g of triethanolamine, 15 to 20 mg/g of polysorbate, 50 to 70 mg/g of isoadipate, 400 to 600 mg/g ethanol (96%) and purified water.

Compositions applicable on the surfaces of mucous membrane can be used for example to eradicate asymptomatic methicillin- and/or vancomycin- and/or mupirocin-resistant nasal colonisations of the hospital personnel. In this manner, the personnel cease to be an infection source.

The term â€œantibacterial compositionâ€ used in the present description refers to any composition containing primycin or a primycin component or a combination of primycin components for use according to the present invention, together with carriers and/or vehicles commonly used in sanitary and hygienic products. The forms and concentration ranges of these compositions are as described for pharmaceutical compositions above.

Bacteriological Studies

The research work during which the present invention was elaborated, was carried out in the Department of Medical Microbiology and Immunology, Medical School, University of PÃ©cs.

Susceptibilities of a total of 105 clinical isolates of genera Staphylococcus, Streptococcus and Enterococcus and 11 international reference strains were tested to primycin, vancomycin, gentamicin, erythromycin, tobramycin, neomycin, ofloxacin, and oxytetracyclin. Identification and characterization of resistance patterns of these bacteria were performed by standard methods.

When forming the test groups we attached great importance to the increasing incidence of drug-resistant microbes causing therapeutic problems. Most important of them are methicillin-resistant Staphylococcus aureus (MRSA), methicillin-resistant coagulase-negative Staphylococcus spp. (MRCoNS), penicillin-resistant Streptococcus pneumoniae (pneumococcus), vancomycin-resistant Enterococcus spp. (VRE). Pneumococcus isolates represented various serotypes, VRE isolates belonged to various species. Moreover, vancomycin-resistance of VRE isolates was based on different genetic backgrounds. Antibiotic-resistant strains were also represented among international reference strains, for example methicillin-resistant Staphylococcus aureus ATCC 43300 (MRSA), Staphylococcus aureus with decreased vancomycin susceptibility ATCC 700698 and 700699 (vancomycin intermediate Staphylococcus aureusâ€”VISA), mupirocin-resistant Staphylococcus aureus ATCC BAA1708 and vancomycin-resistant Enterococcus faecalis ATCC 51299 (VRE).

Susceptibility tests were performed according to the standard microdilution method (NCCLS (CLSI) M7-A7).

Efficacy of antibiotics was tested at concentrations presented in Table 4.

TABLE 4Antibiotic concentrations tested (sensitive MIC range,intermediate range, resistant range).Test agentsFinal concentrations tested (mg/L)Primycin84210.50.250.120.060.030.015Ofloxacin1684210.50.250.120.060.03Tobramycin321684210.50.250.120.06Oxy-321684210.50.250.120.06tetracyclineEryth-1684210.50.250.120.060.03romycinGentamicin1684210.50.250.120.060.03Neomycin321684210.50.250.120.06Vancomycin321684210.50.250.120.06

The lowest concentration at which no bacterial growth was observed after the incubation period is the Minimal Inhibitory Concentration (MIC). The MIC value is inversely proportional to the antimicrobial efficacy. MIC values of antimicrobial agents can differ by species or even by bacterial strains within species. MIC₅₀and MIC₉₀values (the lowest concentrations inhibiting 50 or 90%, respectively, of the isolates) were calculated from a minimum of 10 strains of a microbe group formed according to objective aspects.

The concentration ranges of reference antimicrobial agents tested parallel with primycin were selected to involve the MIC interpretive breakpoints reflecting the clinical applicability (Table 4).

Susceptibilities of bacterial strains and groups thereof to vancomycin, gentamicin, erythromycin, tobramycin, neomycin, ofloxacin and oxytetracycline were in good correlation with literary data (Table 5). Among these agents only vancomycin showed high and extended efficacy.

Resistance patterns of MRSA, MRCoNS and VRE isolates show decreased susceptibility to the reference antibiotics, including erythromycin, which belongs to the macrolide antibiotic group. As it was expected, methicillin- and vancomycin-resistance often coexistes with resistance to the other antibiotics.

We have surprisingly found that primycin inhibited all the tested bacteria with MIC₉₀values of 0.06 to 1 mg/L depending on species, including MRSA, MRCoNS and VRE isolates. Surprisingly, no cross-resistance to primycin appeared with methicillin-resistance or with vancomycin-resistance, despite the fact that primycin belongs to the macrolide group. Cross-resistance to primycin was not experienced among erythromycin-resistant isolates either, as it can be seen in table 5.

TABLE 5Efficacy of primycin and comparative agents against clinical isolates of Gram-positive bacteriaAnti-MIC (mg/L)Ratio ofmicrobialsBacteria (number of isolates)Range50%90%Sensitive/TotalPrimycinStaphylococcus aureus, methicillin susceptible (10)0.06-0.060.060.0610/10Staphylococcus aureus, methicillin resistant (10)0.06-0.060.060.0610/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.03-0.060.030.0610/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.03-0.060.060.0610/10Enterococcus sp., vancomycin susceptible (20)0.5-1â€‰â€‚0.50.520/20Enterococcus sp., decreased vancomycin susceptibility (5)0.25-0.5â€‚â€”â€”5/5Streptococcus pneumoniae, penicillin susceptible (10)0.25-1â€‰â€ƒ0.50.510/10Streptococcus pneumoniae, penicillin resistant (10)0.5-1â€‰â€‚0.5110/10Streptococcus viridans sp. (20)0.5-1â€‰â€‚1120/20VancomycinStaphylococcus aureus, methicillin susceptible (10)0.5-2â€‰â€‚1110/10Staphylococcus aureus, methicillin resistant (10)0.5-1â€‰â€‚1110/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)1-21210/10Coagulase-negative Staphylococus sp., methicillin resistant (10)1-22210/10Enterococcus sp., vancomycin susceptible (20)1-41220/20Enterococcus sp., decreased vancomycin susceptibility (5)â€‚8->32â€”â€”0/5Streptococcus pneumoniae, penicillin susceptible (10)0.25-0.5â€‚0.50.510/10Streptococcus pneumoniae, penicillin resistant (10)0.25-0.5â€‚0.50.510/10Streptococcus viridans sp. (20)0.5-1â€‰â€‚0.5110/20GentamicinStaphylococcus aureus, methicillin susceptible (10)0.25-0.5â€‚0.50.510/10Staphylococcus aureus, methicillin resistant (10)0.25-1â€‰â€ƒ0.50.510/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.03-8â€‰â€ƒ0.1254â€‚9/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.06->16â€‰â€‚0.125>16â€‚6/10Enterococcus sp., vancomycin susceptible (20)â€‚4->168>16â€‚1/20Enterococcus sp., decreased vancomycin susceptibility (5)â€‚8-16â€”â€”0/5Streptococcus pneumoniae, penicillin susceptible (10)â€‚8-161616â€‚0/10Streptococcus pneumoniae, penicillin resistant (10)â€‚8->1616>16â€‚0/10Streptococcus viridans sp. (20)â€‚2->16816â€‚9/20ErythromycinStaphylococcus aureus, methicillin susceptible (10)0.125->16â€ƒâ€‰0.125>16â€‚7/10Staphylococcus aureus, methicillin resistant (10)0.25->16â€‚â€‰>16>16â€‚1/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.03->16â€‚â€‰0.125>16â€‚8/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.125->16â€ƒâ€‰0.25>16â€‚5/10Enterococcus sp., vancomycin susceptible (20)0.03->16â€‚â€‰1>1613/20Enterococcus sp., decreased vancomycin susceptibility (5)0.06->16â€‚â€‰â€”â€”2/5Streptococcus pneumoniae, penicillin susceptible (10)0.03->16â€‚â€‰0.030.03â€‚9/10Streptococcus pneumoniae, penicillin resistant (10)0.03->16â€‚â€‰2>16â€‚2/10Streptococcus viridans sp. (20)0.03->16â€‚â€‰1>1610/20OxytetracyclinStaphylococcus aureus, methicillin susceptible (10)0.25-32â€‚â€‰0.2532â€‚8/10Staphylococcus aureus, methicillin resistant (10)0.125-0.25â€‚0.250.2510/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.125->32â€ƒâ€‰0.251â€‚9/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.125->32â€ƒâ€‰1>32â€‚8/10Enterococcus sp., vancomycin susceptible (20)0.25->32â€‚â€‰1632â€‚6/20Enterococcus sp., decreased vancomycin susceptibility (5)0.25-16â€‚â€‰â€”â€”2/5Streptococcus pneumoniae, penicillin susceptible (10)1-818â€‚8/10Streptococcus pneumoniae, penicillin resistant (10)â€‚4->3232>32â€‚1/10Streptococcus viridans sp. (20)â€‚1->324>3210/20TobramycinStaphylococcus aureus, methicillin susceptible (10)0.5-1â€‚â€‰0.50.510/10Staphylococcus aureus, methicillin resistant (10)0.5->32â€‰1>32â€‚6/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.06-4â€‰â€ƒ0.06410/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.06->32â€‚â€‰0.06>32â€‚5/10Enterococcus sp., vancomycin susceptible (20)â€‚8->3216>32â€‚0/20Enterococcus sp., decreased vancomycin susceptibility (5)â€‚8->32â€”â€”0/5Streptococcus pneumoniae, penicillin susceptible (10)16-321632â€‚0/10Streptococcus pneumoniae, penicillin resistant (10)16->3232>32â€‚0/10Streptococcus viridans sp. (20)â€‚4-321632â€‚1/20NeomycinStaphylococcus aureus, methicillin susceptible (10)0.5-2â€‚â€‰1210/10Staphylococcus aureus, methicillin resistant (10)0.5->32â€‰1>32â€‚5/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.06-4â€‰â€ƒ0.25110/10Coagulase-negative Staphylococus sp., methicillin resistant (10)0.06->32â€‚â€‰0.2516â€‚8/10Enterococcus sp., vancomycin susceptible (20)16->32>32>32â€‚0/20Enterococcus sp., decreased vancomycin susceptibility (5)16->32â€”â€”0/5Streptococcus pneumoniae, penicillin susceptible (10)32->32>32>32â€‚0/10Streptococcus pneumoniae, penicillin resistant (10)>32->32â€‰â€‰>32>32â€‚0/10Streptococcus viridans sp. (20)16->32>32>32â€‚0/20OfloxacinStaphylococcus aureus, methicillin susceptible (10)0.5-1â€‚â€‰0.5110/10Staphylococcus aureus, methicillin resistant (10)â€‚1->1616>16â€‚1/10Coagulase-negative Staphylococus sp., methicillin susceptible (10)0.25-1â€‰â€ƒ1110/10Coagulase-negative Staphylococus sp., methicillin resistant (10)â€‚4->16>16>16â€‚0/10Enterococcus sp., vancomycin susceptible (20)â€‚2->164>16â€‚3/20Enterococcus sp., decreased vancomycin susceptibility (5)2-8â€”â€”2/5Streptococcus pneumoniae, penicillin susceptible (10)1-422â€‚9/10Streptococcus pneumoniae, penicillin resistant (10)1-21210/10Streptococcus viridans sp. (20)1-82414/20

Neither the serotype nor the degree of the penicillin susceptibility of S. pneumoniae strains influenced the excellent efficacy of primycin, as seen in table 6.

TABLE 6Pimycin susceptibilities of 20 S. pneumoniae isolates of various serotypes and penicillin susceptibilityPenicillin susceptible S. pneumoniaePenicillin resistant S. pneumoniaeMIC (mg/L)MIC (mg/L)SerotypePenicillinPrimycinSerotypePenicillinPrimycin19F0.030.519A160.5â€‚9(V)0.030.519A8123(F)0.0150.2519A40.540.0150.519A4180.0150.519A40.530.0150.51440.5â€‚7F0.0150.51420.511(A)0.060.51420.5â€‚6(A)0.0611420.5â€‚6(A)0.0150.523(F)20.5

Neither the species, nor the degree of the vancomycin-resistance or the type of the resistance gene of vancomycin-resistant enterococci affected the excellent efficacy of primycin, as seen in table 7.

TABLE 7Primycin susceptibilities of Enterococcus isolates with various van resistance genesResistance MIC (mg/L)SpeciesgeneVancomycinPrimycinE. faecalisvan A>320.5E. faecalisvan C180.5E. faeciumvan B>320.25E. casseliflavusvan C1160.5E. casseliflavusvan C280.5

The primycin susceptibilities of ATCC reference strains showed good accord with the susceptibilities of the clinical isolates.

Reference strains S. aureus ATCC 43300 (MRSA), S. aureus ATCC 700698, and 700699 (VISA), S. aureus ATCC BAA1708 (mupirocin-resistant), E. faecalis ATCC 51299 (VRE) also proved to be sensitive to primycin to the same extent as it was observed with clinical isolates, as it can be seen in table 8.

TABLE 8Antibacterial activity of primycin against ATCC reference strainsPrimycin SpeciesStrainResistanceMIC (mg/l)Staphylococcus aureusATCC 292130.06Staphylococcus aureusATCC 259230.06Staphylococcus aureusATCC 43300MRSA0.06Staphylococcus aureusATCC 700698VISA0.06Staphylococcus aureusATCC 700699VISA0.125Staphylococcus aureusATCC BAA1708mupirocin-0.06resistantEnterococcus faecalisATCC 292120.5Enterococcus faecalisATCC 51299VRE1StreptococcusATCC 496190.5Enterococcus hiraeATCC 80430.5Bacillus subtilisATCC 66330.03Escherichia coliATCC 25922>64

Taken all together, excellent efficacy of primycin was observed against all the bacteria tested, and this efficacy was not affected by any resistances to any tested antibiotics or by the mechanisms of said resistances.

Based on the facts above it can be established that primycin can be applied excellently against methicillin-resistant Staphylococcus aureus (MRSA), methicillin-resistant coagulase-negative Staphylococcus sp. (MRCoNS), vancomycin-intermediate of vancomycin-resistant Staphylococcus aureus (VISA, VRSA), mupirocin-resistant Staphylococcus sp., vancomycin-resistant Enterococcus sp. (VRE) and penicillin-resistant Streptococcus pneumoniae strains.

EXAMPLESExample 1Ointment Containing Primycin as Active Substance Applicable on the Surfaces of Skin or Mucous Membrane

Composition:

Primycin1.0mg/gWhite vaseline700mg/gWool fat50 mg/gLiquid paraffin300 mg/g

Preparation:

Primycin is suspended in liquid paraffin at 60-65Â° C. White vaseline and wool fat are separately warmed to 60-65Â° C. The two solutions are homogenized and cooled to 35-40Â° C. with continuous stirring.

Example 2Other Ointment Compositions Applicable on the Surfaces of Skin or Mucous Membrane

These ointments are prepared according to the procedure described in example 1 applying one of the following active ingredients in the following concentration ranges.

Composition:

Primycin or0.01-10.0 mg/gPrimycin component orCombination of primycin componentsWhite vaseline600-800 mg/gWool fat50-60 mg/gLiquid paraffin200-400 mg/g

Example 3Aqueous Suspensions Containing Primycin as Active Substance, Applicable on the Surfaces of Skin or Mucous Membrane

Composition:

Primycin0.5 mg/gPoly(vinyl-alcohol)100 mg/gNaH₂PO₄â€¢0 H₂O0.5 mg/gNa₂HPO₄â€¢2 H₂O4.5 mg/gPolysorbate6.0mg/gDisodium edetate1.0 mg/gSodium chloride5.0 mg/gWater for injection ad 1000 g

Preparation:

- 1. Sodium dihydrogen phosphate is dissolved in water for injection, with stirring.
- 2. Disodium hydrogen phosphate is dissolved in the stirred solution.
- 3. Sodium chloride is dissolved in the stirred solution.
- 4. Disodium edetate is dissolved in the stirred solution.
- 5. Polysorbate is mixed with continuous stirring and the solution is adjusted with water for injection.
- 6. The active ingredient is suspended in the mixture with continuous, intensive stirring.

Example 4Other Aqueous Suspensions Applicable on the Surfaces of Skin or Mucous Membrane

These suspensions are prepared according to the procedure described in example 3 applying one of the following active ingredients in the following concentration ranges.

Composition:

Primycin or0.01-10.0 mg/gPrimycin component orCombination of primycin componentsPoly(vinyl-alcohol)50-150 mg/gNaH₂PO₄â€¢0 H₂O0.2-1.2 mg/gNa₂HPO₄â€¢2 H₂O4.0-5.0 mg/gPolysorbate6-7 mg/gDisodium edetate1.0-1.5 mg/gSodium chloride5.0-6.0 mg/gWater for injectionad 1000 g

Example 5Alcoholic Gel Containing Primycin as Active Substance

Composition:

Primycin0.5 mg/gCarbomera10.0 mg/gTriethanolamine15.0 mg/gPolysorbate15.0 mg/gIsoadipate60 mg/gEthanol (96%)500 mg/gPurified water 300 mg/g

Preparation:

Carbomera is swollen in isoadipate. Primycin is dissolved in the mixture of ethanol and purified water with moderate heating. The solution is stirred till it cools down to room temperature. To this solution Carbomera isoadipate dispersion is added. Then triethanolamine is added and the resultant dispersion is stirred till full gelation.

Example 6Other Alcoholic Gel Compositions

These alcoholic gels are prepared according to the procedure described in example 5 applying one of the following active ingredients in the following concentration ranges.

Ingredients:

Primycin or0.01-10.0 mg/gPrimycin component orCombination of primycin componentsCarbomera7.0-14 mg/gTriethanolamine15-20 mg/gPolysorbate15-20mg/gIsoadipate50-70 mg/gEthanol (96%)400-600 mg/gPurified water300-400 mg/g

ADVANTAGES OF THE INVENTION

Spreading of methicillin- and/or vancomycin-resistant Gram-positive pathogens substantially accelerated in the last decades, which rendered all antibiotics affecting these bacteria very valuable both socially and economically.

The present invention is based on newly discovered advantages of a registered active pharmaceutical ingredient with well established use, and thus it offers rapid help in this very urgent need. Primycin and its components are expected to be useful in the treatment of infected people and in the eradication of asymptomatic colonisations from hosts more efficiently than other agents used for this purpose earlier.