Any coloring agents or combinations of coloring agents may be used including but not limited to Acid Blue 9, Red 40, Acid Red 27, Acid Yellow 23, and Food Yellow 3. Although these pigments are only minor constituents, they may play a significant role in defining the aesthetic qualities of the final material

FIG. 7 illustrates a table showing the component makeup of the “Glaze” embodiment of the resins taught herein. The glaze embodiment has all the same components as the “Liquid” embodiment, some of them in different quantities. However, the Glaze embodiment has the addition component of silicone dioxide (CAS No. 7631-86-9) (hereinafter “Polymer 8”). Silicon dioxide is a commonly known compound and its chemical formula is Shown in FIG. 8. In the Glaze embodiment, silicone dioxide is present in the range of 1%-5%. However, depending on the embodiment, silicone dioxide may be present in the range of 1%-9%. As will be explained in more detail with respect to the “thick gel” embodiment below, in at least one other embodiment, silicone dioxide is present in the range of 5%-9%.

FIG. 9 illustrates a table showing the component makeup of the “Thick Gel” embodiment of the resin taught herein. The Thick Gel embodiment has all the same components as the Glaze embodiment, some of them in different quantities. However, the Thick Gel embodiment has a higher concentration of silicone dioxide than the Glaze embodiment. Silicon dioxide is found in the Thick Gel embodiment at a ratio of 5%-9%.

FIG. 10 illustrates a table showing the component makeup of the “10% Liquid Gel” embodiment of the resin taught herein. The 10% Liquid Gel embodiment has all the same components as the Liquid embodiment, some of them in different quantities.

FIG. 11 illustrates a table showing the component makeup of the “Super Thin Gel” embodiment of the resin taught herein. The Super Thin Gel embodiment has all the same components as the Liquid embodiment, some of them in different quantities, however, the Super Thin Gel does not have any of Polymer 3 and adds 2%-9% of PEGG-22 Dimethacrylate (CAS No. 25852-47-5) (hereinafter Polymer 9).

FIG. 12 illustrates the chemical structure of PEG-22 Dimethacrylate (CAS No. 25852-47-5) (hereinafter “Polymer 9”). PEG-22 Dimethacrylate enhances the resin's flexibility and impact resistance, while also improving its adhesion properties.

Table 1 below shows the various example embodiments taught herein and their component ratios.

TABLE 1

Polymer
Polymer
Polymer
Polymer
Polymer
Polymer
Polymer
Polymer

20B
1
2
3
4
5
7
8
9

Liquid
40%-
20%-
20%-
1.9% ± 0.5
0.43% ± 0.05
0.07% ± 0.05
0%
0%

50%
25%
25%

Glaze
30%-
30%-
25%-
1.9% ± 0.5
0.43% ± 0.05
0.07% ± 0.05
1%-5%
0%

35%
35%
30%

Gel Thick
30%-
25%-
25%-
1.9% ± 0.5
0.43% ± 0.05
0.07% ± 0.05
5%-9%
0%

35%
30%
30%

Gel 10%
45%-
20%-
20%-
1.9% ± 0.5
0.43% ± 0.05
0.07% ± 0.05
0%
0%

Liquid
55%
25%
25%

Gel
50%-
10%-
0%
1.9% ± 0.5
0.43% ± 0.05
0.07% ± 0.05
0%
2%-9%

Superthin
69.5%
20%

In yet another embodiment of the resin, a Superthin UV Resin with a slightly different composition is provided. FIG. 13 illustrates a table showing the component makeup of the “20A Superthin” embodiment of the resin taught herein.

In the 20A Superthin embodiment, the resin's first component, making up 69.5% or less of the mass of the resin, is Polymer 1. (See FIG. 2).

The second component, making up 20%±1%, is Hexane, 1,6-diisocyanato-, homopolymer, 2-hydroxyethyl acrylate and propylene glycol monoacrylate-blocked. (CAS No. 1392411-89-0) (hereinafter “Polymer 10”).

In addition to Polymer 1 and Polymer 10, the 20A Superthin embodiment contains 7.6%±1% of Polymer 9. (See FIG. 13).

In addition to Polymers 1, 9 and 10, the 20A Superthin resin contains 1.9%±0.5% of Polymer 4. (See FIG. 4).

In addition to Polymers, 1, 4, 9 and 10, the 20A Superthin embodiment contains 0.43%±0.05% of Polymer 5. (See FIG. 5).

In addition to Polymers, 1, 4, 5, 9 and 10, the 20A Superthin embodiment contains <0.07%±0.05% of Polymer 7. (See FIG. 6).

As one skilled in the art may appreciate, and has already been discussed with respect to other embodiments described herein, while not a required component, the resin formula may also include various coloring agents, each present in minimal concentrations ranging from 0.02% to 0.5% of the total mass of the resin.